thermalright tr tl m12q s x3 cpu fan building blocks 120mm cas | Shop The World
From USA
NewThermalright-TR
Thermalright TR TL-M12Q-S X3 CPU Fan Building Blocks 120mm Case Cooler, PWM Connector Silent Computer Cooling with ARGB Light,Wireless Splicing PC Fan with ARGB Mirror Light Effect,Low Noise
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•[Silent Fan Parameters] CPU Fan size: 124x120x25mm, speed: 2000RPM ± 10%, noise≤28.2DB (A), air volume: 68.9CFM, air pressure: 2.21mm H2O, power supply interface: 4PIN PWM, lighting interface: 5V 3PIN, voltage: DC 12V, current: 0.17A. Higher air flow can improve cooling performance and maintain low noise of the fan
•[High performance heat dissipation] The noise reducing 7-blade design can achieve a speed of up to 2000RPM and a noise level of ≤28.2 decibels. The four corners of the fan are equipped with soft silicone corner pads, allowing the fan to achieve a combination of high heat dissipation and low noise performance.
•[ARGB light effect] The circular infinite mirror at the center of the cooler fan has multiple layers, and the 7 fan blades effectively reflect light, making the argb lighting effect softer. Under the action of airflow, multiple colorful lighting effects can be achieved.
•[ Detail Optimization ] The cooler fan adopts industrial grade strength PBT+PC material with UL CLASSA insulation level, supports PWM series control of the fan, the power interface is 4pin PWM, and the lighting interface is 3pin ARGB. Fans of the same type are connected in series through buckles, and then connected to the corresponding interface of the motherboard through connectors that fasten the wires.
•[ Wireless Splicing ] The new power module cable simplifies wiring and reduces the complexity of internal cables in the chassis, providing powerful power for argb fans. The signals and power are transmitted between fans through contacts (note: the control cable needs to be connected to the side of the fan with pins, do not connect to the other side)
•[Perfect Match ] The CPU fan can not only be used as a chassis fan, but also suitable for pairing with the CPU heat sink to produce a cooling effect, taking away the temperature inside the chassis and the CPU, achieving maximum cooling
From USA
